Cirrus-logic AN234 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Cirrus-logic AN234 herunter. Cirrus Logic AN234 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 7
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
1
Copyright Cirrus Logic, Inc. 2003
(All Rights Reserved)
http://www.cirrus.com
AN234
AK5394A to CS5381 Conversion
by Kevin L Tretter
1. Introduction
The CS5381 is a complete analog-to-digital converter for digital audio systems. The CS5381 performs
sampling, analog-to-digital conversion and anti-alias filtering, generating 24-bit values for both left and
right channels.
The CS5381 offers some unique advantages over the AK5394A including:
- Over 70% REDUCTION in package size (TSSOP)
- 50% less power consumption
- Fewer external components required (See Section 2)
- Overflow detect
- Integrated level shifters
- Over 80% less group delay (48kHz output sample rate)
Table 1 shows a comparison of the key specifications of these two devices.
Table 1. Comparison of Key Specifications
AK5394A CS5381
Conversion (Bits) 24 24
Dynamic Range (A-weighted) dB 123* 120
THD+N dB -110* -110
Analog Core Power Supply (VA) V +5.0 V +5.0 V
Digital Core Power Supply (VD) +3.3 V to +5.0 V +3.3 V to +5.0 V
Digital Interface Power Supply (VL) N/A +2.5 V to +5.0 V
Maximum Power mW 870 348
Maximum Sample Rate kHz 216 200
Package
28-pin SOP 24-pin SOIC/TSSOP
* Dynamic Range and THD+N specified with different input buffer topologies
JUL ‘03
AN234REV1
Seitenansicht 0
1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - AK5394A to CS5381 Conversion

1Copyright Cirrus Logic, Inc. 2003(All Rights Reserved)http://www.cirrus.comAN234AK5394A to CS5381 Conversionby Kevin L Tretter1. IntroductionThe CS

Seite 2 - * See Section 9

AN23422. Typical Connection DiagramsFigure 1. CS5381 Typical Connection DiagramFigure 2. AK5394A Typical Connection DiagramFILT+AINL+AINL-VD0.1µFA/D

Seite 3 - 4. Offset Calibration

AN23433. Pin CompatibilityTable 1 shows the pins of the AK5394A and the corresponding pins of the CS5381. Please note that theAK5394A has 28 pins, and

Seite 4

AN23444.2 AK5394AThe AK5394A will automatically initiate a calibration sequence following a reset. The CAL pin (pin 9) is anoutput that indicates when

Seite 5

AN2345Figure 3. Single-Ended to Differential Input Buffer8.2 Fully Differential Input BufferFigure 4 shows a fully differential analog input buffer.

Seite 6 - 470 µF1000 µF

AN23469. Capacitor Size on Reference Voltage Pin(s)The CS5381 and the AK5394A both require external capacitance on the internal reference voltage pin(

Seite 7

AN2347Contacting Cirrus Logic SupportFor a complete listing of Direct Sales, Distributor, and Sales Representative contacts, visit the Cirrus Logic we

Kommentare zu diesen Handbüchern

Keine Kommentare