Cirrus-logic CRD49530-USB Bedienungsanleitung PDF herunterladen (Seite 12)

CRD49530-USB System Description

CRD49530-USB User’s Manual

The CS4953xx always masters its output clocks (DSP_SCLK/DSP_LRCLK).

Note: MUXED_MCLK is the clock signal that is driven by the CS8416’s RMCK pin. The CS8416

provides the recovered clock from the S/PDIF input unless it loses signal lock, in which case the

CS8416 passes the DSP clock (XTAL_OUT) that it receives on the OMCK pin.

1.3.10.2 Clock and Data Flow for S/PDIF Input

Figure 1-4. S/PDIF Clocking

The S/PDIF clocking architecture is used when any S/PDIF RX is used as an audio source, whether S/

PDIF is the only audio input or is used at the same time as ADC audio (i.e. any S/PDIF RX is selected as

described in "USB (I2S) Audio Input" on page 4-5), and the audio input source multiplexer (U1, U2) is

used to select on-board audio sources. Figure 1-4 illustrates this clocking configuration.

MCLK recovered from the incoming S/PDIF stream must be MCLK for the system, and the codec masters

the input clocks (MUXED_SCLK/MUXED_LRCLK) of the CS4953xx. In this configuration the internal

multiplexer of the CS8416 routes the recovered MCLK to MUXED_MCLK.

Table 1-1. ADC Clocking

Clock Name Clock Master Source Clock Driver Clock Frequency

MUXED_MCLK CS4953xx CS8416 24.576 MHz

MUXED_SCLK MUXED_MCLK CS42448 64*Input Fs (default)

MUXED_LRCLK MUXED_MCLK CS42448 Input Fs

DSP_SCLK MUXED_MCLK CS4953xx 64*Output Fs (default)

DSP_LRCLK MUXED_MCLK CS4953xx 1*Input Fs (default)

CS4953xx

CS42448

CS8416

MUXED_SCLK

DSP_SCLK

DSP_LRCLK

DSP_DAI4

MUXED_LRCLK

MUXED_DAI[3:0]

XTAL_OUT

S/PDIF Input

DSP_DA0[3:0]

MTA S/PDIF

MUXED_MCLK

DAI

DAO

SDIN

SDOUT

PLL

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Keine Kommentare

Cirrus-logic CRD49530-USB Bedienungsanleitung Seite 12