Cirrus-logic CDB61884 Bedienungsanleitung PDF herunterladen (Seite 17)

CDB61884

DS485DB1 17

5.7 Global Control Register Screen

Figure 24 shows the Global Control Register (GCR) register screen, The GCR register screen consists of

the following registers:

– Software reset

– ID registers.

Each bit in the Global Control Register can be access by writing directly to the bit in the Global Control

– Jitter Attenuator

– JA FIFO Length

–AWGAutoIncrement

–Raisen

– Coden

– Jitter Corner Freq.

The variables listed above change the corresponding bit in the Global Control Register. The Software Re-

set Register is a write only register and will clear after the write. The ID Register is a read only register.

Figure 24. Global Control Screen

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Cirrus-logic CDB61884 Bedienungsanleitung Seite 17