Cirrus-logic CRD48L10 Bedienungsanleitung Seite 34

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 44
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 33
1
Chapter 8
Programming MP3 FLASH
1. Configure CRD48L10 as described in CDB-MCU-DEBUG Controller User’s Manual, and launch a command
console window.
2. Within command console, CD to the CS48Lxx\apps\crd48l10-4in-4out\ board directory.
3. Run the script “program_spi_flashA.bat <filename>” where <filename> is the name of the image for the FLASH.
4. When programming is complete, the console window should read “Image validated by read/compare” as shown in
Fig. 8-1.
Figure 8-1. Programming MP3 FLASH
5. If the correct message is not displayed, power down the CRD48L10-4in4out, and check cable JP2 connection
between CDB-MCU-DEBUG Dongle and CRD48L10. Then, try again.
Note: Programming the MP3 flash erases the Master Boot image.
Seitenansicht 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare